Cooling

Welcome to the 'Cooling' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'Cooling'.

Latest blogosphere posts tagged “Cooling”

• Need Help with a Kit :(

  
  Overclock.net - Overclocking.net — Authority: 586
  Im looking forward to purchasing my first liquid cooling kit and I was wondering which would suit me best. The case will be a Lian Li PC-P80 Armorsuit. I have already been looking at the Swiftech H20-220, Danger Den Tower-21 Cooling Kit 360mm Radiator, and the Coolermaster Aquagate max. Thanks for your replies :)
  1 hour ago

• do I need to hook up a fun or some sort of jumper th the CPU fan before I fire up my

  
  Overclock.net - Overclocking.net — Authority: 586
  do I need to hook up a fun or some sort of jumper on the CPU fan before I fire up my new liquid cooled pc for the first time I was thinking the bios might think it doesnt have a fan and not even fire up
  1 hour ago

• one more newb question : should I leave some room in my reservoir for expansion?

  
  Overclock.net - Overclocking.net — Authority: 586
  Should I leave a little room in the reseroir for expansion. Say 10 %, or fill that bad boy up, and just leave alittle room for air? By the way, i have scoured the info here and elsewhere and have found no info on this.
  2 hours ago

• Looking for quiet fans

  
  Overclock.net - Overclocking.net — Authority: 586
  Im looking for a 120x25 fan that pushes around 75cfm, and is under 25db. (If its black with no LEDs then its heaven). Im using this with a swiftech 2x120 radiator but I thought i should post it in the air cooling because its the "air cooling" aspect of water cooling. Any comments are appreciated. Thanks all.
  4 hours ago

• Swiftech MCP655 speed change

  
  Overclock.net - Overclocking.net — Authority: 586
  Well when I first got my pump I tried to change the speed of it when I put my loop together. For some reason it didnt want to budge so I added some force and snap the red dial broke off :(. So the pumps speed is always running at 2 or 3 I believe. Is there some way I can pull the pump apart and change the speed ...
  4 hours ago

• shroud question

  
  Overclock.net - Overclocking.net — Authority: 586
  would putting 25mm shrouds on my 2 38mm deltas give me any gain on my megahalem? I currently have 2 150CFM Deltas in Push/Pull
  4 hours ago

• Cooking the books on climate

  
  lgstarr — Authority: 139
  http://www.ocregister.com/opinion/peer-221438-reviewed-climate.html Mark Steyn: Cooking the books on climate By MARK STEYN 2009-11-27 09:58:25 My favorite moment in the Climategate/Climaquiddick scandal currently roiling the "climate change" racket was Stuart Varneys interview on Fox News with the actor Ed Begley ...
  4 hours ago

• Slim and Quiet cooling pad For Netbook, Laptop, Notebook PC

  
  Kill Deal — Authority: 161
  100% brand new and high quality It is made of high quality plastic, slim and smart design of the cooling pad system Blue LED lights. Light weight, low power consumption Compatible with any notebook computers. Product Description Slim, Quiet and smart design of the cooling pad system with large, ...
  6 hours ago

• Obama escape the Oval Office again

  
  C.O.P.S. — Authority: 136
  He attended a basketball game and fed his face. President Obama attended todays Oregon State-George Washington University basketball game to cheer on his brother-in-law, Beavers coach Craig Robinson. The first lady, Malia and Sasha Obama, and President Obamas mother-in-law Marian Robinson were in attendance as well. ...
  6 hours ago

• [Global] FS: thermalright HR-03 GT

  
  Overclock.net - Overclocking.net — Authority: 586
  FS: thermalright HR-03 GT * Comes with sink, ram sinks, extra VRM sinks (got gtx sink pack), 92mm Yate loon, 60mm fan for mosfets - Kept 4890 under 50*C at load, will work for pretty much every other card with standard mounting Price: $40shipped obo ** If purchased by Dec. 1st will throw in 120mm Yate Loon. ...
  7 hours ago

• Help on buying watercooling stuff

  
  Overclock.net - Overclocking.net — Authority: 586
  Can you guys help me to choose the right water cooling parts for me? Heres what I have so far: Pump = Danger Den D5 12V Water Pump Radiator = Swiftech Extreme Duty Triple 120mm Stackable Radiator with 1/4" BSPP hubs CPU Block = Swiftech Apogee XT Waterblock for Intel socket 1366 (Core i7) and 1156 (Core i5) Im ...
  7 hours ago

• Zip ties can get you so far

  
  Overclock.net - Overclocking.net — Authority: 586
  Just bought a pack of zip ties, and did a little cable managing, and tinkered around a little with my cables, and fans. I just turned on my PC, and I havent tried it under load yet, but my core is running at 28c, 7c below normal. And my GPU is 37, around 10c below normal. Im sure ambience has quite a bit to do about ...
  7 hours ago

• How to install fan controller sensors?

  
  Overclock.net - Overclocking.net — Authority: 586
  Hey guys, sorry if this is a total noob question, but where do you install fan controller temp sensors? I just got an AeroCool Touch 2000 and the directions dont really show much. There is one small picture of one sensor being adhered to the side of the cpu cooler fan so the top of the sensor kindo of sits over the ...
  7 hours ago

• Arctic Silver 5 or Thermalfusion 400?

  
  Overclock.net - Overclocking.net — Authority: 586
  I bought a V8 didnt know it came some good thermal paste? Ive seen reviews about TF400 being better than AS5, I cant find any actual results though? I bought AS5 and am thinking of returning it, if that TF400 is better. Anyone here have experience with TF400 and AS5? Thanks In Advance.
  7 hours ago

• Would a Feser 360 Handle This?

  
  Overclock.net - Overclocking.net — Authority: 586
  A core i7 at 1.45 vcore 4.4 ghz, + a 5870 overclocked to 1ghz core + 1.3vcore. Ive heard that most all 360 rads can handle a core i7 with 2 gtx 275s
  9 hours ago

• First watercooling project

  
  Overclock.net - Overclocking.net — Authority: 586
  Hi :) Ive decided to watercool my sig computer. This was my 3rd computer build but will be my first attempt at watercooling. Any advise will be greatly appreiciated. Heres my shopping list- Order from sidewinders.com Watercool HEATKILLER® CPU Rev3.0 1366 84.95 ...
  10 hours ago

• Dark Knight V Megahalem

  
  Overclock.net - Overclocking.net — Authority: 586
  i know its obviously gonna lean toward megahalem but im trying to do price per performance and i kinda dont wanna spend that much on a cooler but if i have to i will. i just wanna hit 4ghz stable how much of a performance increase do i see in the megahalem over the dark knight?
  11 hours ago

• Watercooling 5870s, any performance benefit?

  
  Overclock.net - Overclocking.net — Authority: 586
  Is there any performance benefit to be had by watercooling the new 5870s? After doing some research I see most people reaching the limit due to voltage, and not temperatures. Can anybody shed some light on this, as Id like to know whether to go with stock or liquid cooling for the 5870s
  12 hours ago

• Trying to boost old system

  
  TechSpot OpenBoards — Authority: 170
  I have an old motherboard with an old processor. I haave a PCCHIPS m848A with an amd 2600. im trying to overclock it but not sure of what im doing. i tried it yesterday but it locked my system up. luckily it reset and i didnt try it again. can anyone help me?
  13 hours ago

• 120mm fan advice plz!

  
  Overclock.net - Overclocking.net — Authority: 586
  I just got a Raidmax Smilodon-EB case and needless to say the stock fans for intake and exhaust dont move any air at all. They wouldve done just as well to leave open vents actually. Anyway, Im looking for some recommendations on good 120mm fans for the bottom front intake and rear exhaust. I saw a couple coolermaster ...
  14 hours ago

Comments about Cooling