JDM

Welcome to the 'JDM' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'JDM'.

Latest blogosphere posts tagged “JDM”

• Oil Take off plate for TB88 Head

  
  Planet Minis — Authority: 172
  Hey folks, I have a TB88 race head kit on my CT and was looking at installing a black custom oil cooler. The guys at TB only sell the complete kit inc take off plate , chrome cooler etc. What type of take off plate can I use on a TB88 head? any ideas. dan
  3 hours ago

• Takegawa grips?

  
  Planet Minis — Authority: 172
  Are these a genuine Takegawa part or a knock off? Ive never seen them before and I usually dont trust any sellers from Thailand, but I think these look pretty cool. I would only buy them if they are actually Takegawa product thou TAKEGAWA GRIP HONDA DAX CT70 ST50 ST70 CHALY CF50 CF70:eBay Motors (item 350285363982 ...
  9 hours ago

• glowing header

  
  Planet Minis — Authority: 172
  well guess thats why my pipe brown, was cold and dark out, i dont think it would get that hot going down the road as the cold air would cool it down. i think cold air worsens the lean condition since colder air is denser than warm air, still havent got a jet change or checked then now loud tappets. its trooper all the ...
  15 hours ago

• top speed lifan 125cc stock???

  
  Planet Minis — Authority: 172
  I was just wondering what top speed I can get out of my lifan 125cc stock engine on a ct70 frame??? Thanks Justin
  21 hours ago

• Can you pin point the age of this bike?

  
  Planet Minis — Authority: 172
  OK looken to pick up this bad boy to restore, or maybe make it my "rat bike". Just want to know the age of it so I can track down parts. I was told its was a 72 z50 mini trail. Im incline to beleave him, but.......I havent seen the bike in person yet, so I dont know if it has any markings on it, But i wouldnt know ...
  1 day ago

• z50 swinger

  
  Planet Minis — Authority: 172
  i here that it is possible to install an xr 80 swinger onto a z50, if it is possible could i get information or pictures on how to do it ! :p:p
  1 day ago

• 86 Z50R carb cleaning/jet question

  
  Planet Minis — Authority: 172
  Hi there, This is my first post/question on the forum. I am cleaning the carb on a 86 Z50R and cant seem to get anything to go through the idle jet. This is the little brass tube that is less than 1/8 inch that is pressed into the main body of the carb. I have soaked and messed with this thing for hours and have had ...
  1 day ago

• 86 z50 compression

  
  Planet Minis — Authority: 172
  Hello-new to here and new owner of 86 z50 special. Probably a dumb question here as its might be posted somewhere here under my nose but dont know where to look. thanks for any help.
  1 day ago

• IRK question

  
  Planet Minis — Authority: 172
  I was about to install an inner rotor kit on my panda, and then I thought about it. You cant run any lights with an IRK can you?
  1 day ago

• Brake Adaptor Question

  
  Planet Minis — Authority: 172
  So I never post on here, but I read it all the time. I have a question about a brake adaptor to run a crab type caliper on nsr forks. I was planning on staying with 8" wheels for now, and I have a disk brake hub. What size disk and what type of adaptor would I have to run in order to achieve this. Thanks in advance.
  2 days ago

• The Best Gran Turismo Rig Ever - BMW E30 M3

  
  The Real JDM - Interactive — Authority: 468
  This is by far the best Gran Turismo game rig ever. Actually it was already one of my favorite E30 M3 BMWs before I even saw the front of it and realized that it is being used to play video games in! Garage Studie is responsible for this masterpiece. I have a feeling I’m going to need to stop by there during an ...
  2 days ago

• Amuse 370Z - The Future Is Here (The Real Pictures)

  
  The Real JDM - Interactive — Authority: 468
  Game Over. Period. This is the hottest thing I have seen in years. I was just yelling and jumping around like I have not done for a long long time. This right here is why I love what I do and why I started Bulletproof 10 years ago. This is innovation, this is quality, this is a level of the game that only Amuse can ...
  3 days ago

• First Picture: Amuse 370Z Rear Bumper!

  
  CarDomain Blog — Authority: 540
  I’ve been on the road a lot lately visiting some amazing people in some equally amazing places. Just this month I’ve jumped from Las Vegas to Dubai to Bahrain to San Francisco with a day or two spurts home in Los Angeles in between travels. Next up I’m off to Arizona, and then Japan (pre-Auto Salon and then ...
  3 days ago

• Honda z50j Finland.

  
  Planet Minis — Authority: 172
  Hi! Im planning to buy a monkey and here in estonia we have z50j finland edition bikes. what can u say abut these bikes, what are the main differences compared to other z50j? i found that it has Honda ABO2E engine and it has 4 speed and manual clutch so is this completely other engine or same as u have in states? Best ...
  3 days ago

• CT70 keeps flooding

  
  Planet Minis — Authority: 172
  I have a CT70 that has been in the garage for the past month while I did some work on the rims and wheel hubs. I put the wheels back on earlier this week and tried to take it for a ride, but after it started up it would only run for a a minute or two before dieing. I pulled the plug and it was wet. I waited and ...
  3 days ago

• Muz Honda JDM Badges (S2000) Installation Instructions

  
  Automotive Manual PDF — Authority: 145
  1) Use an adhesive solvent to spray the badge you are removing. Make sure you use an adhesive solvent (such as Xenit Adhesive Remover) that won’t damage the paint. 2) Once the solvent has penetrated the backing of the badge use a length of dental floss and gently work it under the edge of one of the top badge ...
  3 days ago

• i really want...

  
  Planet Minis — Authority: 172
  like a 79 or 84 z50.. i have z that my dad bought for my older brother like 13 years ago but im not sure what year it is.. its more like mid 90s maybe? early 90s.. it is all white i just really like the older plastics and stuff like on the late 70s early 80s where do you think i could get a roller or with motor ...
  4 days ago

• Customer Car: Saeed’s R35 GT-R

  
  The Real JDM - Interactive — Authority: 468
  I’ve been on the road a lot lately visiting some amazing people in some equally amazing places. Just this month I’ve jumped from Las Vegas to Dubai to Bahrain to San Francisco with a day or two spurts home in Los Angeles in between travels. Next up I’m off to Arizona, and then Japan (pre-Auto Salon and then ...
  4 days ago

• ASI F430 Murders For Fun

  
  CarDomain Blog — Authority: 540
  I’ve said too much about ASI.  And I know I need to calm down and stop blogging about the company, but how could I not share this amazing F430? ASI is just killing everyone. If only this car had used one of the three super nice ASI Dry Carbon F430 wings, this car would have put people in the hospital. Get me an ...
  4 days ago

• Chinese Engine question

  
  Planet Minis — Authority: 172
  OK... i have actually searched. alot of threads i have found have been older. and ive also heard that the quality has improved recently.. i know that the N-1-2-3-4 UP tranny is alright (from what ive read) and a crude but effective way of finding first. QUESTION:: im going mod/resto to my 70h. i want a chinese ...
  4 days ago

Comments about JDM