eda

Welcome to the 'eda' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'eda'.

Latest blogosphere posts tagged “eda”

• Texas Instruments eZ430-Chronos Wireless Watch Development Tool

  
  Embedded Star — Authority: 138
  Texas Instruments introduced the eZ430-Chronos customizable development environment within a sports watch. The kit enables developers to easily harness the leading integration, ultra-low power, and wireless capabilities of TI’s CC430 microcontroller (MCU). Chronos is designed to provide engineers with all of the ...
  1 day ago

• Quick Start Evaluation Guide

  
  Signal Integrity — Authority: 107
  Inspired by David Meerman Scott , Sanjeev and I enrolled the graphic arts talents of Neila Stewart to create our first e-book. It’s a quick start evaluation guide for signal integrity engineers wanting to become acquainted with ADS. What do you think? Quick Start for Signal Integrity Design Using Agilent ADS ...
  4 days ago

• Executive Director Academy graduates look to apply new knowledge

  
  JVA's Nonprofit Street — Authority: 118
  On November 19, JVA and friends celebrated the graduation of the Fall 2009 Executive Director Academy (EDA). Students from a variety of backgrounds in the nonprofit world—all desiring to reach their potential as nonprofit leaders—were recognized for completing the fifth installment of the 13-session, intensive ...
  4 days ago

• LFF 2009: Air Doll

  
  easternkicks.com — Authority: 113
  With an interesting premise that goes awry, Hirokazu Kore-eda’s blow-up doll may develop a heart, but where’s the films soul? In the first of a (short) series we look at some of the more interesting films that premiered at the recent 2009 London Film Festival and will, hopefully, make it to a wider audience. ...
  4 days ago

• Software for designing circuits

  
  Electronics-Lab.com Blog — Authority: 132
  Electronic Design Automation (EDA) tools allow you to draw out a symbolic representation of a circuit using a schematic capture interface, (sometimes) simulate it with a circuit simulator, and then finally lay out the circuit on a printed circuit board (PCB). In the commercial world, many companies use tools ...
  4 days ago

• TowerJazz and Tanner EDA Announce Process Design Kit (PDK – dBusinessNews.com

  
  Best Webmasters — Authority: 142
  TowerJazz and Tanner EDA Announce Process Design Kit (PDK – dBusinessNews.com Tal Golan to Address Convergence of Social Media and Mobile Internet At Access Executive Network Forum COSTA MESA, Calif TechBiz Connection Panel Explores Best Practices of Paid Search Engine Marketing IRVINE, Calif., Nov. 12, 2009 ...
  5 days ago

• Arriba for Android Porting Kit for the MIPS

  
  EDA Blog — Authority: 133
  MIPS Technologies introduced the Arriba for Android Porting Kit (APK) for the MIPS architecture. With the Arriba APK, OEMs can quickly tailor and optimize Android for specific platforms. The Arriba APK is available now. The Arriba APK includes the first year of development tool maintenance, along with 60 days of ...
  5 days ago

• Sunstone Circuits PCB123 v3.3 Circuit Board Design Software

  
  EDA Blog — Authority: 133
  Sunstone Circuits (Sunstone) released version 3.3 of PCB123, which is a circuit board design solution for the electronics design industry. PCB123 v3.3 includes additional design capabilities for PCB designers. PCB123 v3.3 supports a seamless design flow to design and assembly services. The PCB design software can ...
  6 days ago

• PuneChips Editor’s Blog – SystemVerilog and Designer Productivity

  
  PuneTech — Authority: 417
  The most recent PuneChips event was easily the most successful one in the short history of the group. Over 50 engineers attended the “ SystemVerilog ” talk by Clifford Cummings, President of Sunburst Design and SystemVerilog industry guru. A big thank you to a few folks who made this possible is in order; first ...
  1 week ago

• Mentor Graphics Android Development System for TI OMAP35x Processors

  
  EDA Blog — Authority: 133
  Mentor Graphics introduced the Android Development System for the Texas Instruments (TI) OMAP35x processors based on ARM Cortex-A8 technology. Engineers working on OMAP35x processor-based designs can leverage the Mentor Graphics version of the Android application framework to deploy Android-based applications. The ...
  1 week ago

• Verific Software Fronts Oasys Design Systems RealTime Designer

  
  EDA Geek — Authority: 137
  Oasys Design Systems announced that RealTime Designer[tm], Chip Synthesis[tm] software capable of synthesizing register transfer level (RTL) code for 100-million gate designs, now includes support for VHDL through de facto standard front-end software from Verific Design Automation. Verific licensed its VHDL analyzer ...
  1 week ago

• NXP ARM9 Microcontroller with High Speed USB 2.0 OTG Webinar

  
  EDA Blog — Authority: 133
  NXP Semiconductors is offering a webinar: Lowest Cost ARM9 with High Speed USB 2.0 OTG performance for management of USB connectivity . The webcast will take place Tuesday, December 1, 2009 at 11:00am EST (8:00am PST, 16:00 GMT). All registered participants will be entered into a drawing for an ARM9 development tool ...
  1 week ago

• 2009 Top 10 Shapers of the American Landscape

  
  Places and Spaces — Authority: 135
  Here is the list of Top 10 Shapers that I am presenting in EDA listed in alphabetic order. For comparison purposes I have linked each one to its entry in Wikipedia, but these are not definitive descriptions. And the Top 10 Shapers tag at the end will find you a few other interesting links... Daniel Burnham ...
  1 week ago

• Cadence, Toshiba Target Next Generation Mobile, Consumer SoC Designs

  
  EDA Geek — Authority: 137
  Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global design innovation, announced that it has extended and expanded the scope of its recently announced relationship with Toshiba Corporation for COT (customer-owned tooling) and SoC design targeting the growing and increasingly complex mobile and consumer ...
  1 week ago

• eASIC eTools 8.0 Software Suite for 45nm Nextreme-2 Designs

  
  EDA Blog — Authority: 133
  eASIC introduced eTools 8.0 software suite for implementing 45nm Nextreme-2 designs. The eTools 8.0 tool suite delivers a robust ASIC grade design flow with the simplicity, ease of design, and a cost point that is normally associated with FPGA design tools. By focusing on ease-of-use, and low cost of entry, eASIC is ...
  1 week ago

• Crossware Becomes Member of ARM Connected Community

  
  EDA Geek — Authority: 137
  Crossware, a leading embedded software tools developer, announced it is a new member in the ARM Connected Community, the industry’s largest ecosystem of ARM technology-based products and services. As part of the ARM Connected Community, Crossware will gain access to a full range of resources to help it market and ...
  1 week ago

• Mentor Graphics Joins SOI Industry Consortium

  
  EDA Geek — Authority: 137
  The SOI Industry Consortium, aimed at accelerating silicon-on-insulator (SOI) innovation into broad markets, announced that Mentor Graphics Corporation (Nasdaq: MENT) has joined the worldwide organization. Mentor is a global leader in electronic hardware and software design solutions. As an active member and a leader ...
  1 week ago

• REMINDER: Lanny L. Lewyn, Tanner EDA Technical Advisor, Presents on Nanoscale Analog CMOS Design and Shortening … (Marketwire via Yahoo! Finance)

  
  NanoTechBIZZ.com — Authority: 154
  TRONDHEIM, NORWAY–(Marketwire - 11/13/09) - Who: Lanny L. Lewyn, Technical Advisor to Tanner EDA , the world leader in PC-based analog, mixed-signal (A/MS) and MEMS circuit design software, is giving a pre-conference tutorial and invited paper on Physical Design and Reliability Issues in Nanoscale Analog CMOS ...
  1 week ago

• S-Parameter Bisection using Optimization Techniques

  
  Signal Integrity — Authority: 107
  This guest post from my colleague Sanjeev Gupta is a response to a question posted by Merrick M. Moeller on the si-list. In de-embedding a device-under-test (DUT) from its test fixture, it is often desirable to bisect S-parameters into two equal halves. As described in literature, this can be achieved by first ...
  1 week ago

• UMC, TSMC Validates Silicon Frontline F3D for Nanometer Designs

  
  EDA Geek — Authority: 137
  Silicon Frontline Technology, Inc. (Silicon Frontline), an Electronic Design Automation (EDA) company in the post-layout verification market, announced that since the May introduction of the company and its first products, F3D (Fast 3D) for fast 3D extraction and R3D (Resistive 3D) for 3D extraction and analysis of ...
  1 week ago

Comments about eda