honda parts

Welcome to the 'honda parts' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'honda parts'.

Latest blogosphere posts tagged “honda parts”

• Ct70 frames

  
  Planet Minis — Authority: 168
  My garage is getting too full, I have some frames for sale. 3 HK1s, and a 80 also an 81. $45 ea. plus shipping, your choice. 2 of the HK1s have frontends, $45 ea. for the frontends+ shipping, all have swingarms. Pm me your email address if you are interested and want pics. Don
  2 days ago

• 2 1968 Z50 K0 parts bikes 1 slant guard, parting out

  
  Planet Minis — Authority: 168
  Pics and prices to come soon but I just wanted to get a post up. The slant guard frame looks to be damaged pretty bad underneath the back of the tank. Both bikes have the original toggle switch.
  3 days ago

• nos z50a k1 forks for sale

  
  Planet Minis — Authority: 168
  have these left over from a previous project and dont need they now. they have never been mounted and are in excelent condition. they are factory primered with a small area that someone tested paint on. also have a crusty piece of masking tape on them with the part #. I dont have a pic right now nor do I have the part ...
  4 days ago

• Looking for Honda 1971 CT70H Forks

  
  Planet Minis — Authority: 168
  If anyone has any forks for this model or knows where I can find them please let me know. Thanks
  6 days ago

• Honda "Nice" headlight/cowl unit

  
  Planet Minis — Authority: 168
  Headlight cowl unit with built in turn signals. Came off a Honda "Nice" model. Brand new, never mounted. This is a really nice piece for a mini street bike. You will have to fab your own bracketry to fit your bike. I can help if your local to me. $100 firm plus shipping. hunchumaca at msn com
  6 days ago

• 90s Z50 plastic and seat

  
  Planet Minis — Authority: 168
  Front and rear fenders and seat. The rear fender has the typical cracking at the mount (havent seen one yet that doesnt do this) both side tits are still intact. Some scratching on both. Seat could use a cover, looks like something spilled on it. Not pretty parts but good for a beater/rider. $35 plus shipping. ...
  6 days ago

• Heidenau K75 3.5X8" tire set for sale

  
  Planet Minis — Authority: 168
  Hey Guys im sitting on a set of brand new Heidenaus that im looking to offload. They are the K75 series and are 3.5" wide by 8", great for a street going 8" wheeled mini. Ide like $80.00 for the set plus shipping. Thanks B Attached Images K-75_2.jpg (28.6 KB)
  1 week ago

• CT70 K1 ignition switches, also some HK1 frames

  
  Planet Minis — Authority: 168
  I have 3 K1 ignition switches with keys, $40 ea. shipped. I also have 2-3 HK1 frames for sale if anyone needs a project, both have frontends and swingarms, PM if interested, good straight and rust free, also another with a dent by the decal, not bad , rust free. No titles Don
  1 week ago

• Z50 hardtail frame & parts

  
  Planet Minis — Authority: 168
  I have a Z50 Hardtail frame for sale, dont know the year, Funny thing is it has no VIN, never did from what I can tell, it is black now, but underneath it looks like factory grey primer? no cracks or welds, has batterybox mounts and tailight mount, forkstop is good. Maybe it was a replacement factory part? $60 + ...
  1 week ago

• Reeg disk brake setup,BBR 10" rim,Red Baron sproket trade for GPX150,160/Z50 parts

  
  Planet Minis — Authority: 168
  Reeg disk brake setup with BBR 10" rim, Buchanan HD Stainless spokes, Red Barron 35 tooth sproket, and Bridgestone M-402 tire. Absoullutely perfect condition. The brake pedal has been notched to fit around the footpeg mount and the master cylinder mount has been clearanced a little(refer to pic). Tire is practically ...
  1 week ago

• Z50 parts, havent been used in a couple years

  
  Planet Minis — Authority: 168
  First off, all prices are shipped but this only applies if you live in a state that touches another state. If you live anywhere else, let me know. I accept PayPal or USPS money order only. Dont ask, thats all Ill accept. Not looking for trades. Pickup is always allowed if you live near 20165. Reply here, PM, e-mail, I ...
  1 week ago

• WTB: ZB lighting stator, flywheel, airbox

  
  Planet Minis — Authority: 168
  Managed to lose mine! Wanted: ZB50 lightihg coil (and stator plate) flywheel airbox
  1 week ago

• WTB/CT70HK1 speedometer

  
  Planet Minis — Authority: 168
  Hi, Let me know what your guys may have.Thank you :)
  2 weeks ago

• Vintage Bike auction in Ma.

  
  Planet Minis — Authority: 168
  Found this link online, I wish I lived near here to check this out. A lot of old bikes being sold. Public Auction Sale* MOTORCYCLE
  2 weeks ago

• Looking for ZB50 forks and triples

  
  Planet Minis — Authority: 168
  I am looking for a set of ZB50 forks and triple trees. Please email me if you have a set to sell. Thanks. dsmith7797@aol.com
  2 weeks ago

• WTB Z50 rear wheel and forks

  
  Planet Minis — Authority: 168
  I looking for a rear wheel and front forks for a 1980+ Z50. The rear must have the XR50 style brake drum Please PM me and let me know what you have and your price shipped to 91709. Thanks
  2 weeks ago

• 1970 CT70 Head

  
  Planet Minis — Authority: 168
  I have a Head from a 1970 CT70, It has the steel chamber and the valves are 22mm ex 25mm in. Cam and rockers are included. I think all it would need is new valves and seals to be good. Looking to get $50 for it Gethighracewear@Windstream.net Attached Images DSC00078.JPG (57.8 KB) ...
  3 weeks ago

• 85 z50 roller

  
  Planet Minis — Authority: 168
  1985 z50 roller no title, just painted maroon metalic an black with monster painted on the tank, hubs done maroon metalic, tires have some rust an rear wheels wobbles a little, comes with hd front springs an checkerd seat, will do 200shipped obo.... also have 85 motor with 88 kit an bigger head an carb may be chinese ...
  3 weeks ago

• G-Craft Rear Grab Bar CT70

  
  Planet Minis — Authority: 168
  I have one brand new G-Craft grab bar for the ct70 that I am looking to sell. I have taken it out of the package to look at but never installed. I am looking for 175.00 plus shipping to your location. IT IS BRAND NEW and these go for 200.00 normally so I am saving you some bucks. I will post up a picture if you ...
  3 weeks ago

• 98 z50 rear wheel

  
  Planet Minis — Authority: 168
  If anyone has a rear wheel thatll fit a 98 z50 they wanna sell, let me know. Thanks
  3 weeks ago

Comments about honda parts