milling

Welcome to the 'milling' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'milling'.

Latest blogosphere posts tagged “milling”

• Hints on finding the right mill

  
  The Fresh Loaf — Authority: 452
  I know there are a number of excellent mills for different applications, so I hope I get this detailed enough to really pinpoint which will work best for me. Thanks in advance for your advice! Im looking for a mill that can accomplish the following; can mill coarse or very fine flours (dry grains) for baking, pasta, ...
  5 days ago

• Commercial Flour Milling for Dummies

  
  The Fresh Loaf — Authority: 452
  Simplified Milling Process Diagram , courtesy of www.wheatflourbook.org .    
  1 week ago

• Where to buy bulk wheat berries?

  
  The Fresh Loaf — Authority: 452
  Ive searched the forum and found some older posts, some with dead URLs in them. What are some possible sites for a Seattle guy like me to get bulk amounts of wheat berries?  Ive checked a couple sites (PleasantHills and MontanaWheat) and shipping makes prices jump up higher than I expected.  Im not looking for ...
  1 week ago

• Durum wheat

  
  The Fresh Loaf — Authority: 452
  Does anyone know if fine durum wheat flour becomes less yellow when ground really fine? Or can the Durum flour I have purchased have come from a less yellow variety? Also, if Semolina refers to a grind, then what is the difference between finely ground semolina, and finely ground Durum?  I have read that in the U.S. ...
  1 week ago

• Heading to Central Milling in Petaluma, Ca. Anyone want to split some flour?

  
  The Fresh Loaf — Authority: 452
  Hi. I got so excited by Allisons blog, that Im going to head out to the mill and pick up some stuff.  Anyone need anything?  Ill be getting some whole wheat for sure but am open to spliting things.  Let me know if your interested. Perry Brown pb4jo@sbcglobal.net
  2 weeks ago

• Heating of milled grain?

  
  The Fresh Loaf — Authority: 452
    I am just starting with a Magicmill 3 grain mill. When I grind some flour, it comes out quite warm, more than I would have expected. I have read that one of the advantages of stone ground flour is that it doesnt get as damaged due to the lack of heating during milling. Need I be concerned with this at all? Does ...
  2 weeks ago

• Freshly milled wheat doesnt stick, to make dough when is being kneaded

  
  The Fresh Loaf — Authority: 452
  Hi!, Ive been making my whole wheat bread (with bought whole wheat flour) since 1978 and I just bought a Nutrimill and milled my first berries, got some beautiful and amazing looking flour and did continue as I have always had, started adding in the bowl of my old and powerfull Magic Mill Bosch kneader and ...
  3 weeks ago

• My visit to Central Milling

  
  The Fresh Loaf — Authority: 452
  Im a compulsive baker.  When Im in a grocery store, sometimes I walk down the baking ingredients aisle, even if I dont need anything, just to look.  Pulling a freshly baked apple pie or loaf of bread from the oven, with its aroma wafting through the house with the promise of deliciousness to come, is one of the most ...
  3 weeks ago

• Anyone in the SF bay area interested in whole wheat flour from Central Milling?

  
  The Fresh Loaf — Authority: 452
  Hello Fresh Loafers!  Long time lurker, first time posting. In my quest for sourcing good whole wheat flour, I called Nicky Giusto at Central Milling ( www.centralmilling.com ) asking about prices and shipping.  I knew that Central Milling produces Whole Foods 365 Organic Unbleached All Purpose flour, and that ...
  3 weeks ago

• Daniel Rohr’s Colander Table

  
  3rings — Authority: 136
  The experimental project, built from a 900 lb solid block of aluminum, takes over four weeks to produce. Resultantly, only ten will ever be made. Designed to delete space and material, the Colander table is German designer Daniel Rohr ’s latest project. Its bowl-like form, punctured by 909 holes and sheathed with ...
  4 weeks ago

• Crosshair reports shareholder letter regarding developments in Labrador

  
  Uranium Investing News — Authority: 436
  Crosshair Exploration & Mining Corp. reports shareholder letter regarding recent developments with the Nunatsiavut Government in Labrador. October 8 th , 2009 marks the half way point of the moratorium on uranium mining and milling put in place by the Nunatsiavut Government. The letter can be found on the ...
  4 weeks ago

• Foundation may fund study on uranium’s impact

  
  Uranium Investing News — Authority: 436
  Star Tribune reports the Danville Regional Foundation is considering funding the study on the impact of uranium mining and milling. The foundation, formed in 2005 following the sale of Danville Regional Medical Center, last week issued a request for qualifications for a proposed study from interested firms, ...
  4 weeks ago

• Thomas Global for quality machinery

  
  Avaxhome,Astalavista,ESnips & All.. — Authority: 141
  What is an industry without proper machinery. It is necessary for every industry to equip itself with high quality machinery. So it becomes very important to purchase the right kind of machine tool attachments from the right place. Thomas Global furnishes a manufacturer’s directory of worldwide product information ...
  4 weeks ago

Comments about milling