quadzilla

Welcome to the 'quadzilla' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'quadzilla'.

Latest blogosphere posts tagged “quadzilla”

• Merry Chrismas to all you Fish Heads out there.

  
  The Alley Fish Fry — Authority: 103
  Merry Christmas to you all. I have been lucky enough to test my Christmas present to myself early. 10 foot x 24" x 3 1/4" styrene with 8mm Paulownia stringer and carbon fibre by Mo.Lots of fun shaping it last month and it is lots of fun to ride. The Halo fins seem to work OK for the size of the board , but look ...
  3 days ago

• Why did GM do this?

  
  Brian Gallimore's Website — Authority: 127
  I do not understand why GM thought it was a good idea to scale the coolant temperature gauge like this. There is no way you can look at it and figure out what the temperature is unless you are good at doing odd fractions in your head really fast. All you know it is somewhere between two numbers. Why?
  3 weeks ago

• Stepper Motor Pictures

  
  Brian Gallimore's Website — Authority: 127
  I had to take apart one of the little stepper motors from my gauge cluster to see what was inside.  It is amazing you can get these little motors for $3 each… those little tiny gears are amazing by themselves. img_4966 ◄ Back Next ► Picture 1 of 4
  3 weeks ago

• Quadzilla’s Gauge Cluster

  
  Brian Gallimore's Website — Authority: 127
  GM installed poor-quality stepper motors in most all GM trucks in the 2003-2006 model years. Amber’s Tahoe was covered because she had under 60000 miles, but Quadzilla is a year older and has 20000 more miles so I was SOL . After a little research I figured out I could replace the steppers myself and save about ...
  3 weeks ago

• Door Repair

  
  Brian Gallimore's Website — Authority: 127
  I’ve been driving around with some door damage caused by some worthless waste of flesh a while back.  I wanted to try to repair the damage myself, so I finally upgraded my wire welder to a MIG.  The cylinder cost me twice what I paid for the used welder in the first place, but now I have have it for future ...
  3 weeks ago

• Building a New VE Table

  
  Brian Gallimore's Website — Authority: 127
  This is what I spent the better part of today working on, the VE table for Quadzilla. I’ve done this before, but now I’m dealing with a 2-bar OS, so I have double the range of pressure variables. There are two ways to go about building this table, one uses a wideband AFR recorder in open loop mode, and the ...
  4 weeks ago

Comments about quadzilla