trouble shooting

Welcome to the 'trouble-shooting' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'trouble-shooting'.

Latest blogosphere posts tagged “trouble shooting”

• really high idle after throttling down

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  in general my bike runs pretty well, everything is stock, mostly. no muffler baffle, no headgasket, needle on leanest setting, holes in intake cover. when i first start the engine it idles properly, but when i give it gas and then release it back to idle, it spins way too fast. if i let it idle for 10-15 seconds it ...
  9 hours ago

• Leaky secondary shut off new style nt carb

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  The new style nt has a barrrwl nut that connects the gas line to the carb the two red washers that contain the gas have failed does anyone have thus problem or ideas on how to solve it. I have tried gasket sealer making washer from paper gasket bike innertube rubber but it still drips. I think I am going to get the ...
  1 day ago

• fuel wont ignite.

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  well, it seems like my bike just keeps getting more and more problems if i ride it more and more, today when i tried it out it started out fine. and i drove a little. but later when i was gonna try it out again it just wouldnt start. i check if there are a spark. and yes there is. i check if i got gasoline. yes i do. ...
  1 day ago

• Bike became REALLY loud...

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  I was tightening my muffler onto my motor (the nuts had gotten loose and the muffler was wobbling) and I accidentally snapped off one of the bolts protruding out from the motor. I tightened the remaining nut as much as i could and the muffler seems to be pretty secure. However, when I tested it out, the bike was a lot ...
  1 day ago

• Before burning your bike .......

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  I wanted to tell you about a problem that drove me crazy for several days. The bike would not start not matter what I would do. Following some posts, I measured with the multimeter the values of the different magneto and CDIs cables , getting approximate values to those shown in the posts. But still could not get ...
  2 days ago

• HELP PLEASE!!!! My spocket wont move

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  My spocket and chains are seized i checked everything this is my first engine and i cant ride my bike since the spocket wont turn thus the tire wont spin i need help please however when i take the spark plug out it does move but when i put it back it locks? what is this about? i want to ride my bike and start ...
  2 days ago

• HELP PLEASE!!!! My spocket wont move

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hi well im new and i somehow installed a 66 raw engine on my beach cruiser (i want it on my stingray but i couldnt fit it.) However the sprocket in the wheel wont move cuz the one inside the motor wont turn so theres no way of running my bike if i cant get the wheel to turn at all Can anyone help me been working ...
  2 days ago

• Wireless Speedometer---magneto interference?

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hi Everyone! I recently put on a wireless speedometer and it seems to work well when I am using the bike with the motor off. Once I start the bike the speedo still reads, but it says I am going way faster than I really am. I am pretty sure that this has something to do with the magneto, but is there anything I can ...
  2 days ago

• Wireless Speedometer---magneto interference?

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hi Everyone! I recently put on a wireless speedometer and it seems to work well when I am using the bike with the motor off. Once I start the bike the speedo still reads, but it says I am going way faster than I really am. I am pretty sure that this has something to do with the magneto, but is there anything I can ...
  2 days ago

• Clutch cable keeps slipping, and wont tighten all the way

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hi, my knowledge of these are amatuer at best, so please simplfy answers or direct to the right terms or right page! I figured there is probably a thread on this somewhere here, but I could not find it. If you know one, Ill surely use it. Problem: The wheel continues to spin while the clutch is pulled, gets bad ...
  3 days ago

• Desktop and Laptop Support Engineer jobs, walkin today 4th, 7th, 8th, 9th, 10th, 11th, 12th December 09

  
  CareerGuruz.Com — Authority: 152
  Desktop EngineerQualification: Graduate/DiplomaJob Description:-Providing Desktop & Laptop support to end users.-Providing IT assistance it includes application support, hardware and software installation and troubleshooting.-Configuring Lotus Note or Out look.-Knowledge on Server.-Providing Level 1 Support to ...
  3 days ago

• Rear Sprocket Slipping

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Howdy its mick29 here I recently bought a 40t rear sprocket with a mounting carrier that clamps to the rear wheels hub ( im shaw youve all seen them ) my problem is it keeps moving very slowly round the hub ive tried retighten it but still moves Has anyone had the same problem and how can it be fixed Is there a glue ...
  3 days ago

• Bike wont give speed!?

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hello! i`ve had some issues with my bike lately, but a week ago i thought i had fixed it all. but apparantly i didnt. when i was going for a ride today to try it out it simply wont "give speed". i start peddeling. release clutch and the bike start just fine, i twist the throttle to get some speed, but it wont take me ...
  4 days ago

• Diagnostics... Whats wrong and how to fix it?

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Hey Everybody, I want to start this thread for diagnosing your MB. Please kindly attach audio/ video/ pics on how to determine whats wrong with an MB, and what you did to fix it. Let me start with the dreaded air leak. I burned my first engine with this defect. Ill speak in terms of my experience but feel free to ...
  5 days ago

• Why isnt there a forum for Visas for Thais wishing to travel oversea

  
  TeakDoor.com - The Thailand Forum — Authority: 461
  There are a few threads that seem to need to belong in their own forum regarding Thais travelling outside the LoS. the current Thai Visas and visa runs forum doesnt seem to differentiate between different scenarios.
  6 days ago

• Clutch Stuck in engaged position

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  I have an 80cc raw motor with the clutch stuck in the engaged position. I havent seen any posts on this yet so if there is one I hope youll forgive me! Are there any suggestions out there. Thanks guys and gals.
  6 days ago

• Carb cutting out at high speeds

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  Im new here and built my bike which is a Kent beach cruiser with a HT motor. Im having a problem with what I think is the carb. At high speeds the engine will cut out for a few seconds. If I let off the throttle a little it is usually fine. I thought it may be spark related so I replaced the plug and wire. Also at ...
  6 days ago

• Can anyone identify this engine?

  
  Motorized Bicycle Engine Kit Forum — Authority: 162
  I got the bike from some clown getting ready to throw it away at the dump. It needs a spark plug and some TLC. Does anyone know the manufacturer? Miniatura de Adjuntos      
  6 days ago

• The Baby Owner’s Manual: Operating Instructions, Trouble-Shooting Tips, and Advice on First-Year Maintenance

  
  Cheap Discount Coupon Buy Now FREE Shipping! — Authority: 165
  Binding: Paperback Manufacturer: Quirk Books The Baby Owners Manual: Operating Instructions, Trouble-Shooting Tips, and Advice on First-Year Maintenance The title, Baby Owner’s Manual, suggests the promise and the problem of this cheeky and comprehensive guide written by a pediatrician and his son. First-time ...
  6 days ago

• System Admin, System Support, LINUX Administration jobs, walk-in on 3rd, 4th, 5th December 09

  
  CareerGuruz.Com — Authority: 152
  Sr.System AdministratorQualification: Any GraduateJob Description:Performed all levels of hardware and software systems support for computers based on windows and LINUX , administration, , & troubleshooting of LAN, installation of operating system, printer, THIN CLIENT CONCEPT, Mail Server & SMTP, internal ...
  6 days ago

Comments about trouble shooting