woodworking

Welcome to the 'woodworking' tag page at Technorati. This page features content from the farthest reaches of the Blogosphere that authors have "tagged" with 'woodworking'.

Latest blogosphere posts tagged “woodworking”

• Worlds Worst Table Leg Turner

  
  Sippican Cottage — Authority: 514
  
  2 days ago

• #9: Irwin Industrial Tools 3061001 Miter Saw Laser Guide

  
  SuperSave Price.com — Authority: 164
  Irwin Industrial Tools 3061001 Miter Saw Laser Guide Irwin (68) Buy new: $43.34 $27.81 24 used & new from $24.74 (Ranking is updated hourly. Visit the Bestsellers in list for authoritative information on this product’s current rank.) Read the original here:  #9: Irwin Industrial Tools 3061001 Miter Saw ...
  2 days ago

• Super cuts: Saw blade delivers superior results

  
  The Hardware Aisle — Authority: 137
  I was using my table saw recently to cut up some maple plywood, and discovered that my 10-inch, carbide-tipped blade wasnt cutting very smoothly, and more troubling, it was splintering the maple veneer. That was a bit surprising because the blade was relatively new and still pretty sharp. So, what choice did I have? I ...
  4 days ago

• Braggin’ on my hubby

  
  Teaching Good Things — Authority: 126
                A job that my hubby just finished. It’s a playhouse, complete with a loft inside! He took the pictures… just wish he would have had the windows and door open.
  4 days ago

• Projects: Rebirth Of A Dresser

  
  Toolmonger: The Week In Tools — Authority: 487
  This old dresser has been handed down through two generations of my family before I had it. It’s close to 50 years old and has been reworked more than once. It has no particular value save its clothes-holding properties. It has been in my bedroom for close to 30 years and it’s time for a change – preferably to ...
  5 days ago

• Critical Break: 60-100 Series: Woodworking

  
  You Are Not Your O's Kote — Authority: 119
  Critical Break is our crafting and economics column written by Qtipus. Q is an experienced crafter and also well versed in using the Auction House to turn a decent profit. Enough so that he was able to fund his own relic, Gungnir. Every Tuesday you will find Qs rants, raves and good crafting practices here. Part ...
  5 days ago

• Lindow-White Rose Engine Lathe

  
  Toolmonger: The Week In Tools — Authority: 487
  The folks at Lindow-White make a Rose Engine based on the Victorian-era model that allows you to apply the Rose Engine techniques of ornamental turning to wood and metal work. The Rose Engine is a type of lathe with a headstock that can rock side to side; that action is controlled by circular cams (called rosettes) ...
  6 days ago

• Update on Furniture for Becoming Independent

  
  Deep Craft — Authority: 118
  1 of 16 painted panels by the artists at Becoming Independent Late last week I received the first batch of panels painted by the artists of Becoming Independent , exploring the theme of ’space’. There will be a total of 16 panels (2 per chair), all painted in acrylic on plywood boards, to be mounted in the ...
  6 days ago

• A Good Read: Workholding In The Lathe

  
  Toolmonger: The Week In Tools — Authority: 487
  Workholding in the Lathe by Tubal Cain (The nom de plume of the late Tom D. Walshaw) published now by Special Interest Model Books is a good small book dealing with an important subject for those of use with a lathe in the shop. The book is aimed at the model engineer and home shop machinist with a smaller lathe. ...
  6 days ago

• This Bark has Bite, ID Wood iPhone App

  
  HomeFixated Daily DIY — Authority: 123
  We imagine when they developed the I.D. Wood iPhone application – an index of wood samples and information – there were a few name ideas that went straight into the FAIL folder. Our minds went straight for: - Pocket Wood - Little Woody - Mr. Wood - Wood Hunt - miWood (If you wonder why they’re fails, enter ...
  6 days ago

• Important Advice You Should Follow When Searching For Heavy Duty Concrete

  
  Pinchisgringos.com — Authority: 460
  One of the most flexible building materials available is concrete. You can make pretty much anything with concrete, from fancy vanities to drives. While you don’t need a large amount of skill to work with concrete it can be very physically demanding. Before you start working with concrete you will need to have some ...
  1 week ago

• Keep nuts, bolts, and screws organized

  
  theSalmonFarm Blog — Authority: 122
  Somewhere in a corner of your basement or garage you probably have a small bench where you go to fix things – a cord on a lamp, a loose screw on a chair, a door hinge, etc. And on a shelf near that bench (or in a drawer) there is an old coffee can where you keep the left over screws from old projects. It has lots of ...
  1 week ago

• #10: MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece

  
  SuperSave Price.com — Authority: 164
  MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece MLCS (22) Buy new: $69.95 $39.95 2 used & new from $39.95 (Ranking is updated hourly. Visit the Bestsellers in list for authoritative information on this product’s current rank.) Go here to see the original:  #10: MLCS 8377 Router Bit ...
  1 week ago

• Wooden Sheds – How To Pick The Right Set Of Plans

  
  Homeschool Facts — Authority: 462
  Building wooden sheds makes for a great project, and you dont have to be a seasoned professional to build one for yourself. Wooden sheds are really versatile and theyve been around for years. If...
  1 week ago

• Woodworking in America at Valley Forge: A 17th century carved box by Peter Follansbee

  
  The Sandal Woods video podcast and blog — Authority: 125
  I invite you to step back in time. Step back to the 17th century, please, and admire the carving in this little box by Peter Follansbee; the attention to detail in the delicately scalloped edges of the lid; and the joinery, enhanced by the beautiful nails used to assemble the box.I also recommend Peter’s web [...]
  1 week ago

• #5: MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece

  
  SuperSave Price.com — Authority: 164
  MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece MLCS (22) Buy new: $69.95 Click to see price 3 used & new from $26.32 (Ranking is updated hourly. Continued here:  #5: MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece
  1 week ago

• #6: MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece

  
  SuperSave Price.com — Authority: 164
  MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece MLCS (22) Buy new: $69.95 Click to see price 4 used & new from $24.99 (Ranking is updated hourly. Visit the Bestsellers in list for authoritative information on this product’s current rank.) See the original post here: #6: MLCS 8377 ...
  1 week ago

• It’s Friday! Field Trip Day!

  
  The O Word — Authority: 113
  (apologies to those of you who are not fans of “Madagascar” – I’ve heard that line way too many times recently) Good show this morning at The O Word . At least, I think it was a good show. Go give it a listen and let me know what you think… I had mentioned a while ago about getting the Hope Chest ...
  1 week ago

• OSCILLATING TOOL FOR WOODWORKING AND TRIM

  
  CVN Video — Authority: 142
  BOB SCHMIDT SHOWS YOU A MUST HAVE TOOL FOR YOUR REMODELING PROJECTS AND HOME RENOVATION NEEDS … WOODWORKING MOLDING BASEBOARD CASING CABINETS HOW TO DIY REMODELING RENOVATION TOOL
  1 week ago

• Some things are not easy to buy over the web

  
  theSalmonFarm Blog — Authority: 122
  The kitchen base cabinets are being installed and they still don’t have handles, knobs, or bin pulls. It’s not that I don’t have them; rather, I don’t have ones that look right. Let me explain … First, I need 36 “handles” for the base cabinets and my preference is for classic bin pulls. I’ve shopped ...
  1 week ago

Comments about woodworking